Hayabusa 2 (Хаябуса-2), Procyon – H-IIA F26 – Танэгасима – 03.12.2014 04:22:04 UTC

Автор Космос-3794, 13.08.2010 10:49:07

« назад - далее »

0 Пользователи и 2 гостей просматривают эту тему.

tnt22

https://tass.ru/kosmos/6789132
Цитировать22 АВГ, 17:54
Японская капсула с образцами пород астероида Рюгу приземлится в Австралии в 2020 году

Планируется, что зонд, который сейчас находится рядом с астероидом, отправится на Землю в декабре 2019 года, он должен будет приблизиться к планете примерно за 12 месяцев

ТОКИО, 22 августа. /Корр. ТАСС Алексей Заврачаев/. Капсула с образцами пород астероида Рюгу, взятых японским зондом "Хаябуса-2" ("Сокол-2"), приземлится отдельно от аппарата в запретной зоне Вумера на территории штата Южная Австралия. Об этом сообщило в четверг Японское агентство аэрокосмических исследований (JAXA).

В настоящее время японские и австралийские власти практически завершили процесс согласования с целью предоставления доступа в эту зону. Она была создана после окончания Второй мировой войны совместно с Великобританией. В частности, там соорудили полигон для проведения ракетных испытаний. Отсюда же в 1967 году был запущен первый австралийский спутник, предназначенный для исследования верхних слоев атмосферы.

По плану, зонд, который сейчас находится рядом с астероидом, отправится в обратный путь на Землю в декабре этого года. Примерно за 12 месяцев он должен будет приблизиться к планете. Перед входом в атмосферу он сбросит капсулу с добытыми образцами. Это будет сделано на случай того, если с аппаратом что-либо случится во время приземления.

Астероид Рюгу (в переводе с японского - "Дворец дракона") находится между Землей и Марсом. "Хаябуса-2" был запущен к нему в декабре 2014 года с космодрома на японском острове Танэгасима. Особые надежды ученые возлагают на то, что на астероиде удастся обнаружить следы воды и органических веществ, что, как полагают, может помочь в разгадке тайны распространения жизни во Вселенной.

Зонд совершил уже две успешных посадки на космическое тело с целью забора грунта, а также сделал многочисленные снимки его поверхности.

tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa 8 ч. назад

In an operation today (August 26), the sample catcher was stored in the re-entry capsule (see figure). The sampler and capsule teams gathered to watch and the operation was completed successfully. The capsule is now ready for Earth return!


tnt22

http://www.hayabusa2.jaxa.jp/en/topics/20190903e_TM/
ЦитироватьPostponement of target marker separation operation

The 'Target marker separation operation' scheduled for September 5 has been postponed due to the spacecraft entering the Safe-Hold [*] state. The condition of the spacecraft is normal.

Background to the current situation:
Hayabusa2 is equipped with four reaction wheels that are used to control the posture of the spacecraft, and posture control is usually performed using three of these reaction wheels. On August 29, the back-up reaction wheel that has not been used since October last year was tested, and an abnormal value (an increased torque) as detected. The spacecraft therefore autonomously moved into the Safe-Hold state. Details of the cause of the abnormal torque value are currently under investigation. On August 30, restoration steps were taken and the spacecraft returned to normal. However, as the spacecraft moved away from the home position due to entering Safe-Hold, we are currently having to return to the home position. We will return to the home position this weekend.

The attitude of the spacecraft is controlled by three reaction wheels as before. Entering the Safe-Hold state is one of the functions employed to keep the spacecraft safe, which means that procedures have worked normally.

We will report again about the target marker separation when a new schedule has been decided.

Hayabusa2 Project
2019.09.03

* Safe-Hold occurs when an abnormality is detected in a spacecraft (such as an artificial satellite or Solar System astronomical probe). The solar cell panel is directed towards the Sun and the level of power generation is held constant while the spacecraft spins (rotates). This mode stabilises the posture and only the minimum necessary devices are active, such as those used for communication. The state gives the safety of the spacecraft the highest priority. In the case of Hayabusa2 which is currently in the vicinity of the asteroid, moving to Safe-Hold also accelerates the spacecraft away from the asteroid to avoid a potential collision.

tnt22

Цитировать 小惑星探査機「はやぶさ2」‏Подлинная учетная запись @haya2_jaxa 16 ч. назад

準備が整いましたので、本日(9月12日)、10:30 JSTに探査機はホームポジションから降下を始めました。ターゲットマーカ分離運用です。降下速度は、秒速3mm(時速約11m)ですので、非常にゆっくりです。探査機はだんだん加速し、9月16日には高度1kmに達して、ターゲットマーカを分離する予定です。
ЦитироватьТеперь, когда всё подготовлено,  в 10:30 JST 12 сентября (01:30 UTC 12 сентября) космический корабль начал спуск из своего исходного положения для проведения операции отделения маркера цели. Скорость спуска очень медленная и составляет 3 мм/с (около 11 м/ч). Космический корабль постепенно ускоряется, чтобы достигнуть высоты 1 км 16 сентября, когда намечено сбросить маркер цели.



Цитировать ilarina @_elbertina 3 ч. назад

Hayabusa2 started to very slowly descend back to Ryugu. The plan is to separate two target markers on Sep 16, preparing for MINERVA-II2 rover deployment later on. Target markers are supposed to represent the rover, so it's a rehearsal of sorts

tnt22

#1024
09:00 UTC 16 сентября, высота 3,7 км. Сокол-2 начал передачу изображений, полученных камерой ONC-T. Адрес галереи указан в твите. Текущее изображение получено в 00:33 UTC  16 сентября с.г.
Цитировать 小惑星探査機「はやぶさ2」 Подлинная учетная запись @haya2_jaxa 18 мин. назад

9月16日 10:00JST、高度は3.7㎞です。  望遠カメラONC-Tによる航法用画像のweb配信を開始しました。 http://www.hayabusa2.jaxa.jp/galleries/onc/nav20190916/ ...  この画像は、9月16日 9:33JST受信の画像です。


tnt22

http://www.hayabusa2.jaxa.jp/en/topics/20190916e_TMORB/
ЦитироватьTarget marker separation operation

From September 12 to September 17, the 'Target marker separation operation' will be performed. After that, the 'Target marker orbit observation operation' will continue. This is an operation to observe the target marker that goes around Ryugu, and it will be done until the target marker is landed (until about September 23). This operation was rescheduled from September 5 as announced in another article.

These 'Target marker separation operation' and 'Target marker orbit observation operation' are rehearsals for the separation operation of MINERVA-II2 Rover-2 (University consortium development) scheduled for October.

Figure 1 shows an overview of the operation. The descent starts at a low speed from September 12, and the TM is separated at a surface altitude of 1km from around 0:00 to 2:00 (JST) on September 17. A total of two TMs will be separated. They will be put into the equator and polar orbits around Ryugu, respectively. After that, the spacecraft moves to a position 20km away from Ryugu, with the sun behind. From that position, the optical camera continuously observes the TM trajectory descending around Ryugu. With the sun on the back, the retroreflective film covering the surface of the TMs shines brightly and can be observed. They will be observed until around September 23.


[Open in a separate window]
Figure 1 Overview of the target marker separation operation and orbit observation operation
(Image credit: JAXA)

Figure 2 shows the mounting position of the targer markers. B and A are already separated from the five target markers. This time, E and C will be separated.


[Open in a separate window]
Figure 2: Target marker. 
(Image credit: JAXA)

Hayabusa2 Project
2019.09.16

tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa[/COLOR][COLOR=#657786] 5 мин. назад

September 16 at 15:52 JST: the altitude of the spacecraft is 3.5km. The first image was captured by the telephoto ONC-T at 15:13 JST. The Urashima Crater fills the whole photo, whose width is about 390m. The second image was taken by the wide-angle ONC-W1 camera at 15:43 JST.



tnt22

Цитировать HAYABUSA2@JAXA @haya2e_jaxa[/COLOR] 23 мин. назад

Image of the first target marker (TM) separation, TM-E!

Separation time: 2019/9/17 at 01:17 JST Altitude: 1km

This is an overlay of images taken every 4s (for ~1min) as the spacecraft ascends at 11cm/s. TM descent speed is still almost zero. ( JAXA, Chiba Inst. Tech & collab)




19 мин. назад

The separation image of the 2nd target marker, TM-C!

Separation time: 2019/9/17 at 01:24 JST Altitude: 1km

This is an overlay of images taken every 4s (for ~1min) while the spacecraft ascends at 11cm/s. TM descent speed is still almost zero. ( JAXA, Chiba Inst. Tech & collab)


tnt22

https://spaceflightnow.com/2019/09/17/hayabusa-2-completes-practice-run-for-deployment-of-last-asteroid-lander/
ЦитироватьHayabusa 2 completes practice run for deployment of last asteroid lander
September 17, 2019 | Stephen Clark


One of two target markers released by Japan's Hayabusa 2 spacecraft is seen in this overlay image with frames showing the target marker's location at 4-second intervals. Credit: JAXA

Japan's Hayabusa 2 spacecraft deployed two target markers Monday above asteroid Ryugu in a rehearsal for the release of the mission's final landing robot next month.

The robotic asteroid explorer released the two 4-inch (10-centimeter) ball-shaped markers seven minutes apart Monday, after the Hayabusa 2 spacecraft descended to a distance of about 3,300 feet (1 kilometer) fr om Ryugu.

The Japan Aerospace Exploration Agency, or JAXA, released a pair of images showing the target markers, each covered in a reflective film, after their release from Hayabusa 2. The target markers are unpowered and entirely passive objects designed as navigation aids for Hayabusa 2 around the asteroid.

With both target markers away, Hayabusa 2 fired its thrusters to begin an ascent back to a home position farther from the asteroid. Ground teams are in the final stages of planning another descent toward Ryugu in October, during which Hayabusa 2 will deploy the last of four landing robots to the asteroid's surface.

"We released two target markers from an altitude of about 1 kilometer, and these images were just released," said Makoto Yoshikawa, Hayabusa 2's mission manager at JAXA. "The purpose of this release is a rehearsal of the release of the MINERVA-II-2 small rover next month."

Hayabusa 2's cameras will track the movement of the two navigation aids as they fly in space around Ryugu over the next several days. Scientists expect Ryugu's tenuous gravity will pull the target markers to the asteroid's surface within a week.

"We can observe the target marker's orbit around Ryugu and we can then determine the gravity field of Ryugu in detail, so this is a new operation," Yoshikawa said Tuesday in a press briefing at the European Planetary Science Congress.

Hayabusa 2 is in the final phase of its science campaign at asteroid Ryugu, wh ere it arrived in June 2018 after a three-and-a-half year journey from Earth. The spacecraft has conducted two touch-and-go landings on Ryugu — one in February and another in July — to gather pristine asteroid samples for return to Earth.

Last year, Hayabusa 2 deployed three mobile landers to hop around Ryugu. Two MINERVA-II landers, developed in Japan, and a larger robot named MASCOT managed by the German and French space agencies beamed back images and scientific data from Ryugu's surface.

One more lander remains in Hayabusa 2's toolkit.

The MINERVA-II-2 mobile lander was developed by a consortium of Japanese universities as a piggyback payload for Hayabusa 2. The robot is smaller than a soccer ball, but carries mechanisms to allow it to move around the asteroid, along with a camera, a thermometer, photodiode, and an accelerometer.

Hayabusa 2 is scheduled to depart Ryugu by the end of this year using plasma engines, aiming for a return to Earth in December 2020, when the craft will release a parachute-equipped re-entry capsule to land in Australia.

Scientists will retrieve the asteroid specimens for detailed analysis.

"If we have 0.1 grams (of material), we can do all the sample analysis, but we hope we will have much more," Yoshikawa said.

"We want to study the organic matter on Ryugu because we want to know the origin of life on the Earth, and we think Ryugu has original matter that became life," he said. "So our main purpose is analysis of the organic matter on the surface of Ryugu."

tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa 7 мин. назад

[MINERVA-II2] Today (09/28) at 10:30 JST (on-board time), the spacecraft  began its descent from the home position for the separation operation of MINERVA-II2 (Rover2).⁠

zandr

#1030
https://nplus1.ru/news/2019/08/24/Ryugu-no-dust
ЦитироватьНа астероиде Рюгу не нашли пыли
Анализ фотографий, полученных спускаемым модулем MASCOT, который в октябре прошлого года работал на поверхности астероида Рюгу, показал, что его поверхность лишена пыли и мелкодисперсного вещества. Это довольно необычно для тела, которое миллионы лет подвергалось космическому выветриванию. Кроме того, вещество астероида очень похоже на метеориты типа углистых хондритов, а сам он действительно мог образоваться при столкновении двух тел с разными составом. Статья опубликована в журнале Science.
Модуль MASCOT (Mobile Asteroid Surface Scout) стал третьим и самым крупным из спускаемых аппаратов, сброшенных с борта межпланетной станции «Хаябуса-2» на поверхность околоземного астероида (162173) Рюгу. Масса модуля, похожего на коробку, составляет 9,6 килограмма, а размеры — 30×30×20 сантиметров. Среди полезной нагрузки аппарата — камера, радиометр, магнитометр и гиперспектральный микроскоп. 


В октябре 2018 года MASCOT совершил успешную посадку на поверхность астероида и проработал на ней 17 часов, занимаясь исследованиями состава грунта и его свойств. Все собранные данные были успешно переданы на Землю через орбитальный аппарат.


Данные, собранные станцией, частично подтвердили идею о том, что астероид представляет собой связанную гравитационными силами «кучу щебня», средняя плотность которой составляет 1,2 грамма на кубический сантиметр, и образованную, вероятно, в ходе столкновения двух тел. Не так давно ученые также получили новое доказательство высокой пористости вещества астероида, проанализировав работу радиометра модуля MASCOT. 


Теперь же группа планетологов во главе с Ральфом Яуманном (Ralf Jaumann) подвела итоги изучения фотографий, полученных камерой MASCam в оптическом и ближнем инфракрасном диапазонах волн в ходе работы на поверхности Рюгу.


Оказалось, что вещество астероида очень похоже на углеродистые метеориты типа хондритов CI, найденных на Земле: в нем видны яркие включения, похожие на хондры. Валуны на Рюгу достаточно темные и имеют ширину от десяти сантиметров до одного метра, при этом те из них, которые имеют ровные, растрескавшиеся поверхности и острые края, кажутся светлее, чем валуны с более неровной (немного напоминающей цветную капусту) поверхностью. 


Два типа пород распределены примерно одинаково по поверхности Рюгу. Предполагается, что это могло быть следствием того, что Рюгу образовался после столкновения двух тел с разным составом, а возникшие обломки в дальнейшем сформировали новое тело. Еще одно объяснение заключается в том, что прародитель астероида мог иметь внутреннее деление на зоны, различавшиеся температурой и давлением, что привело к образованию двух типов пород. 



MASCOT подтвердил и другое, ранее высказывавшееся предположение: поверхность Рюгу лишена мелкодисперсного вещества и межпланетной пыли. Это достаточно необычно, так как пыль должна присутствовать из-за бомбардировки астероида микрометеоритами в течение миллиардов лет. Предполагается, что пыль могла улететь в космос из-за крайне низкой гравитации на Рюгу, например, под действием выбросов водяного пара или воздействия электростатических сил, или попасть в полости внутри астероида. В любом случае, отсутствие продукта космического выветривания указывает на сложные геофизические процессы, происходящие на поверхности астероида.


В сентябре 2018 года «Хаябуса-2» десантировала на астероид два небольших спускаемых модуля MINERVA-II 1, которые прыгали по его поверхности и прислали ряд снимков, в том числе кадры движения Солнца по небу над Рюгу.
Александр Войтюк

zandr

https://nplus1.ru/news/2019/09/20/MINERVA-II2-test
Цитировать«Хаябуса-2» провела репетицию сброса последнего спускаемого модуля на Рюгу

@baffinsquid/twitter.com

 
Станция «Хаябуса-2» со второй попытки провела репетицию спуска на астероид Рюгу последнего оставшегося спускаемого модуля MINERVA-II-2. С километровой высоты на астероид сбросили два светоотражающих маркера-целеуказателя, после чего отследили их положение, сообщается на сайте миссии.
Уже больше года автоматическая межпланетная станция «Хаябуса-2» исследует с орбиты околоземный 500-метровый астероид (162173) Рюгу. Помимо получения образцов вещества астероида как с его поверхности, так и из внутренних слоев и их дальнейшего возвращения на Землю, в задачи миссии входит высадка на астероид четырех спускаемых модулей. Ранее станция уже сбросила на Рюгу два небольших модуля MINERVA-II-1 и аппарат MASCOT (Mobile Asteroid Surface Scout), которые получили ценные научные данные.


В настоящий момент на борту «Хаябусы-2» остался последний спускаемый модуль MINERVA-II-2. Его размер составляет 15 сантиметров в диаметре, 14,5 сантиметра в высоту, а масса составляет 877 граммов, модуль оснащен датчиками температуры грунта, камерами, акселерометром, а также четырьмя разными прыжковыми механизмами, предназначенными для передвижения модуля по поверхности Рюгу. Основная задача модуля — проверка навигации и работы в среде с чрезвычайно малым гравитационным ускорением.


Ранее станция хотела сбросить два маркера-целеуказателя на поверхность Рюгу и отследить их полет в качестве репетиции высадки спускаемого модуля, запланированной на октябрь этого года, однако тогда она закончилась уходом аппарата в безопасный режим. Вторая попытка сброса началась 12 сентября, а 17 сентября станция снизилась до высоты в один километр, после чего от нее успешно отделились оба маркера. Затем станция начала подъем со скоростью 11 сантиметров в секунду на 20-километровую орбиту, непрерывно фотографируя маркеры: Солнце, находившееся за аппаратом, хорошо освещало светоотражающую поверхность маркеров, что делало их четко видимыми. Наблюдения за маркерами продолжатся вплоть до 23 сентября.

 
"Ход полета маркера TM-С над астероидом Рюгу"
                   
                      JAXA
Подробнее о целях миссии «Хаябуса-2» можно прочитать в нашем материале «Собрать прошлое по крупицам».
[свернуть]
Александр Войтюк

zandr

Возможно выше и было, но раз уж до него дошла очередь:
Цитировать
  Внешний вид модуля MINERVA-II2 и его полетного контейнера.
https://nplus1.ru/news/2019/09/06/hayabusa-2-safe-mode

tnt22

http://www.hayabusa2.jaxa.jp/en/topics/20191001e_MNRVII2/
ЦитироватьMINERVA-II2 (Rover2) separation operation

From September 28 - October 3, 2019, MINERVA-II2 (Rover2) (university consortium development) will be separated from the Hayabusa2 spacecraft. The MINERVA-II2 (Rover2) Orbital Operation will then continue until October 8.

Figure 1 shows the overview of the operation. The descent begins at a slow speed on September 28. Rover2 is then separated at a high altitude (about 1km) towards the asteroid equator. The anticipated separation speed is between 13 cm/s to 17 cm/s. Hayabusa2 will follow the separated Rover2 as far as possible using optical observation, while climbing after separation to an altitude of 8 - 10km and proceeding to hover.

From this operation, the following results are expected:
* Science result: contribution to the high accuracy estimation of Ryugu's gravitational field.
* Engineering result: Separation and landing of a small probe from high altitude, and flight trajectory analysis.


[Open in a separate window]
Fig 1: Overview of the MINERVA-II2 (Rover2) Separation Operation and Orbital Operation. on
(Image credit: JAXA)

Hayabusa2 Project
2019.10.1

tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa 8 мин.8 минут назад

[MINERVA-II2] October 2 at 19:42 JST. The altitude is 3.4km. We've started our navigation image delivery. This time we'll post the wide-angle & telescopic images alternately so the entire asteroid can be seen.
#1: 19:03 JST (ONC-W1)
#2: 19:33 JST (ONC-T)
http://www.hayabusa2.jaxa.jp/en/galleries/onc/nav20191002/ ...



tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa 1 мин. назад

[MINERVA-II2] 10/2 at 19:30 JST: GO/NOGO decision has been made and the result was "GO". Operation will continue. Members of the MINERVA-II2 (Rover2) university consortium are also participating in the operation.

tnt22

Цитировать Jonathan McDowell ‏Подлинная учетная запись @planet4589 37 мин. назад

Hayabusa-2's last passenger for Ryugu is disembarking. The Minerva-2 hopper-rover will be ejected at about 1500-1700 UTC today (11 am - 1pm EDT)

tnt22

Цитировать HAYABUSA2@JAXA‏ @haya2e_jaxa 21 мин. назад

[MINERVA-II2] 10/2 at 22:23 JST. The altitude of the spacecraft has reached about 2400m. The descent speed is about 10cm/s.

tnt22

ЦитироватьHAYABUSA2@JAXA‏ @haya2e_jaxa 7 мин. назад

[MINERVA-II2] MINERVA-II2 is confirmed to have separated today (10/3) at 01:38 JST. The separation time was 00:57 JST (on-board time). The spacecraft condition is normal.
16:38 UTC / 15:57 UTC

tnt22

Цитировать Jonathan McDowell‏ Подлинная учетная запись @planet4589 3 мин. назад

So MINERVA-II2 separated from Hayabusa-2 at 1557 UTC, 1 km above the surface of Ryugu. It will slowly descend to the suface over the next week, with landing expected by Oct 8.